| Vom Thema belegte Seiten: [1 2 3 4] > | MemoQ 2014 R2 very, very slow!?! Initiator des Themas: Neil Ashby
|
|---|
Neil Ashby
Spanien
Local time: 19:56
Spanisch > Englisch
+ ...
Hi,
I've just updated my memoQ version from 2013 R2 to 2014 R2 and it's running incredibly slowly, anyone else experiencing similar problems?
I work with DNS 13 which also uses up plenty of RAM but I had no problems with memoQ 2013.
Anyone else out there with a similar experience and, even better, suggestions to resolve the problem.
TIA
| | | | Kevin Fulton 
Vereinigte Staaten
Local time: 13:56
Deutsch > Englisch
| Same experience, no solution ... | Jan 27, 2015 |
... unfortunately.
I've especially noticed this using large customer-specific TMs.
| | | | Neil Ashby
Spanien
Local time: 19:56
Spanisch > Englisch
+ ...
THEMENSTARTER
Thanks for your comments Kevin, good to know I'm not alone.
I'm finding it rather pathetic, Trados can handle these TMs without slowing down. I prefer MemoQ as it is more intuitive and generally quicker to work with than Trados but if I have to wait because it slows down ("no response" for a 4 or 5 seconds) while it types each and every word then it becomes useless, I'd rather have my money back!
Kilgray are you out there? Can you suggest anything (apart from using smal... See more Thanks for your comments Kevin, good to know I'm not alone.
I'm finding it rather pathetic, Trados can handle these TMs without slowing down. I prefer MemoQ as it is more intuitive and generally quicker to work with than Trados but if I have to wait because it slows down ("no response" for a 4 or 5 seconds) while it types each and every word then it becomes useless, I'd rather have my money back!
Kilgray are you out there? Can you suggest anything (apart from using smaller TMs, that would be like saying don't use your years of experience when working, go back to square one) that may help speed things up?
I'm going to use memoQ 2013 for now, because I haven't actually found any advantages in 2014. It just looks different and the locations of buttons, features, etc. need to be relearnt. So it's costing me more time than I'm gaining.
[Edited at 2015-01-28 11:13 GMT] ▲ Collapse
| | | | Alma de Kok
Niederlande
Local time: 19:56
Mitglied (2006)
Polnisch > Niederländisch
+ ...
| Turn off predictive typing and auto-pick | Jan 28, 2015 |
I had the same problem and this worked for me.
[Edited at 2015-01-28 11:02 GMT]
| | |
|
|
|
Neil Ashby
Spanien
Local time: 19:56
Spanisch > Englisch
+ ...
THEMENSTARTER
Thanks Alma
I'll give it a try, but when I'm not using voice recognition software I would really like predictive typing to be available....
Come on Kilgray, help us out with this one, do we need supercomputers to run memoQ 2014 (in all its glory), DNS and the internet at the same time? I have an Intel Core i7 processor so I shouldn't need to turn off memoQ's features in order for it to run smoothly, or what's the point in paying for the software?
| | | | Michael Beijer
Vereinigtes Königreich
Local time: 18:56
Mitglied (2009)
Niederländisch > Englisch
+ ...
| memoQ seems to be slowing down as it grows yet bigger and bigger… | Jan 28, 2015 |
The new memoQ is indeed as slow as molasses. Although it has a ton of features, it isn't much fun to use these days. Maybe time for yet another "refactoring"?
CafeTran + Dragon 13 run lightning-fast on my computer, and CafeTran has a ton of features.
| | | | | I'm having similar problems | Jan 28, 2015 |
Upon upgrading to 2014 I find I'm spending more and more time tapping my fingers than ever. I would love to hear what Kilgray has to say about this.
| | | | | don't store projects folders or resources on network drives | Jan 28, 2015 |
Hi all,
Just a thought, as it's something I've unfortunately seen often: make sure all your projects and TM/TB/other resources are only on *local* drives.
| | |
|
|
|
Kevin Fulton
Vereinigte Staaten
Local time: 13:56
Deutsch > Englisch
| No LiveDocs, predictive typing, muses, Dragon, etc. | Jan 28, 2015 |
And everything is on a local drive. I run MemoQ using its basic features. I have 16 GB of RAM, so that isn't a problem. Unlike some of the people posting here, my system isn't cripplingly slow, just annoyingly slow.
| | | |
I find it rather buggy... cursor seems to jump out of the segments all the time... maybe because I'm going rather fast? It got slow on one or two occasions and I actually had to switch to 2014 to finish the job... next day, slowness was gone...
People in other places say it must be my system, since Kilgray never releases anything "buggy"... maybe, maybe...
I7 processors, 16GB RAM (34 virtual), 120GB SSD, ... See more I find it rather buggy... cursor seems to jump out of the segments all the time... maybe because I'm going rather fast? It got slow on one or two occasions and I actually had to switch to 2014 to finish the job... next day, slowness was gone...
People in other places say it must be my system, since Kilgray never releases anything "buggy"... maybe, maybe...
I7 processors, 16GB RAM (34 virtual), 120GB SSD, 1T HDD... is this not able to cope with it? ▲ Collapse
| | | | John Fossey
Kanada
Local time: 13:56
Mitglied (2008)
Französisch > Englisch
+ ...
| Resource location | Jan 28, 2015 |
Denis Hay wrote:
Hi all,
Just a thought, as it's something I've unfortunately seen often: make sure all your projects and TM/TB/other resources are only on *local* drives.
This is unfortunately something that is becoming more and more the norm - Kilgray needs to make their product compatible with resources located in cloud locations such as Dropbox, etc., if they are going to stay up to date.
| | | | Elena Nevado
Spanien
Local time: 19:56
Englisch > Spanisch
+ ...
Hi!
Did someone find a solution? I am working on an online project and the typing is extremely slow :S I can't work if I have to wait two seconds for every single letter I write.
I have changed the synchronization to manual and then again to auto save, I have changed the autopick and the predictive typing, I have updated memoq and I don't know what else I can do...
If I use memoq in another computer it works perfectly so I don't know what the problem is.... See more Hi!
Did someone find a solution? I am working on an online project and the typing is extremely slow :S I can't work if I have to wait two seconds for every single letter I write.
I have changed the synchronization to manual and then again to auto save, I have changed the autopick and the predictive typing, I have updated memoq and I don't know what else I can do...
If I use memoq in another computer it works perfectly so I don't know what the problem is.
Help! ▲ Collapse
| | |
|
|
|
LEXpert
Vereinigte Staaten
Local time: 12:56
Mitglied (2008)
Kroatisch > Englisch
+ ...
| Slow movement between segments, overruns | Apr 2, 2015 |
I've been having the same issue. Moving between segments in particular gets painfully slow, and then it suddenly overruns 10 or 20 segments (or more) in one go and ends up far beyond where I want to go in the file.
For some reason, rebooting my computer seems to help, but the slowness slowly begins to re-accumulate.
| | | |
This has affected me in the last week or so. I've switched-off as much as possible but it doesn't seem to help. The files I'm working on are not especially large (up to about 10,000 words) and I've been Using MemoQ without this problem since version 5. Mostly it's just an irritant - I have to click in each segment twice and wait a few seconds before using the scroll wheel.
| | | | ulrika månsson (X)
Schweden
Englisch > Schwedisch
+ ...
| anyone downgraded? | Apr 13, 2015 |
Hi,
just out of curiosity - did anyone try to downgrade, back to 2013 och 2013 R2?
And if yes - did it help?
kind regards,
Ulrika Månsson
| | | | | Vom Thema belegte Seiten: [1 2 3 4] > | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » MemoQ 2014 R2 very, very slow!?! | Trados Business Manager Lite | Create customer quotes and invoices from within Trados Studio
Trados Business Manager Lite helps to simplify and speed up some of the daily tasks, such as invoicing and reporting, associated with running your freelance translation business.
More info » |
| | Trados Studio 2022 Freelance | The leading translation software used by over 270,000 translators.
Designed with your feedback in mind, Trados Studio 2022 delivers an unrivalled, powerful desktop
and cloud solution, empowering you to work in the most efficient and cost-effective way.
More info » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |
Login to reply/comment 
