English to Russian Tech/Engineering Other

Оборудование компании Kohler

Other trademarks and trade names are those of their respective owners.
Follow all local plumbing, electrical, and building codes.
In commercial applications where there is a large difference in hot and cold supply pressures or frequent fluctuation in either supply line is anticipated, it is strongly recommended that pressure regulators be installed.
Read these instructions and determine the locations of all required components before beginning installation.
For optimum performance, 1/2" copper, 3/4" PEX, or 1/2" CPVC dedicated water supply lines are recommended.
If possible, install the valve before installing the interface(s).
If possible, flush all piping thoroughly before installing the valve.
If the pipes are flushed after the valve is installed, clean the inlet screens before using the system.
This **valve is not intended for single-outlet use**.
A qualified electrician should install a 120 V GFCI electrical outlet, within the stud framing, above the valve.
If possible, install the electrical outlet before installing the valve.
This valve complies with ASME A112.18.1/CSA B125.1, ASSE 1016/ASME A112.18.1016/CSA B125.16, UL1951, CSA C22.2 No.14, CSA C22.2 No.68, and NOM 003.
This valve is listed with ASSE, IAPMO/cUPC, and UL.
Vertical and horizontal mounting options are shown above.